Welcome to our Technical Support section.  This section provides technical support for our products along with other services we provide.

We also provide some general support for various welding machinery that is related to the use of our products.

The pages and files contained within this section are in either HTML or Acrobat PDF format.  To read and print the Acrobat PDF formatted pages you will need to have the Adobe Acrobat Reader (or plug-in) installed on your computer.  If you do not have the reader you may download free software for it by clicking on the icon below.

Select the product or category below for technical support information.

REMOTE AMPERAGE CONTROLS
	FAQ (Frequently Asked Questions) about remote amperage controllers.
	Do you have a new model Pipeliner or an old model?
	How to wire an old model Pipeliner machine board to a new model circuit board.
	Installing the Pipeliner remote amp control.
	Installing a Pipeliner with GFI protection.
	General machine troubleshooting for Pipeliner problems.
	Testing  the hand control unit.
	Testing the machine control circuit board.
	Calibrating the hand control to the machine board.
	Technical support for older models Mfg. prior to 6/1/02.
IDLER CONTROLS
	FAQ (Frequently Asked Question) about idler controls and troubleshooting problems.
	Converting a R-57 vacuum idler using the Weldtron-57 upgrade kit.
	Converting a Linc-III idler control to operate 12 volt solenoids.
	Upgrading an R-57 idler system to operate automatically using the original vacuum system.
	Proper connection to Cable brand remote controls when using our self-contained idlers.
	GOOD NEWS FOR OWNERS OF SA-200 MACHINES WITH OPERATIONAL R-57 VACUUM IDLER SYSTEMS!