|
Retail Sales Page
Commercial buyers use the
Commercial Sales pages. |
| Quantity Price
Discounts are at: 2, 3, 4, 5, 10, 15,
20, 25 & 50+
Press "Add to Cart" button for current price. |
The more you buy---the more you save! |
|
Generic Idle Circuit Boards |
|
Stock # WT-70501 |
Model LINC-I Lincoln SA-200 and SA-250 (w/DC) |
Our generic replacement for the Lincoln idle
boards found on SA-200 and similar I machines. It is a direct
replacement for the following Lincoln part numbers:
M-13474-(all revisions)
M-12662-(all revisions)
M-16723-(all revisions)
|
Stock # WT-70503 |
Model LINC-II Lincoln SA-250 (w/AC) and some Classic
Series. |
LINC-II A generic replacement for
the idle boards found on Lincoln SA-250, Classic 250, Older Classic 3D, and
Classic 300 machines.
It is a direct replacement for the Lincoln part number
M-134708-(all
revisions)
|
Stock # WT-70477 |
Model MILLER-IMiller Big 40, AEAD and all that used Miller
PN 049-443 or 071-609 |
A generic replacement for the Miller 071-609
and 049-443 idler board. |
Stock # WT-70470 |
Model MILLER-III Miller Big 20 Miller PN 005-172 |
A generic replacement for the idle board
found in old Miller Big 20 machines. |
|
Weldtron Specialty Idle Circuit boards & Idler Upgrade
Kits |
|
Stock # WT-70520 |
Model Weldtron-57 Lincoln R-57
Vacuum Upgrade Kit |
A kit to
upgrade obsolete R-57 and K series vacuum idlers to electric solenoid
systems. Kit contains a
Weldtron-UI idler board and a
SOL-WT57 solenoid along with other electrical hardware to operate the
system.
|
Stock # WT-70512 |
Model Weldtron-UI Universal Idle
Controller for all machines |
Our heavy duty "self contained" idler board.
Designed to be impervious to ignition noise and to drive up to 30 amp 12
volt solenoids. Has both pull and release on trigger terminals and a self
contained sensor for sensing both AC and DC together or independently.
|
Model Stock # WT-70530 |
Model Weldtron-UI-57UG Upgrade kit
for OPERATIONAL R-57 vacuum idlers.
Better known in the old days as a "Rev-up kit". |
A Modification for
operational R57 vacuum idlers to idle up on the
use of power or welding current. Used to modify working R-57 idlers and is
designed so that when the R-57 finally fails and parts cannot be obtained
for repair, a simple addition of a Weldtron SOL-WT57 solenoid is all that it
takes to completely replace the R-57 vacuum system. |
Stock # WT-70519 |
Model SOL-WT57 Extra heavy duty dual
coil 12 Volt solenoid for Weldtron-57 upgrade kits. |
A powerful solenoid
with 40 amps intermittent duty pulling power that switches to an internal .8
amp holding coil when the solenoid pulls completely in. Spring loaded push
out when deenergized. Utilized in the Weldtron-57 idler control. Has .25"
quick connect tabs for easy wiring. |
Stock # WT-70529 |
R-57 WT-UI Parts Kit Parts kit to
upgrade a Weldtron-UI to drive operational R-57 vacuum idlers. |
Additional parts to a Weldtron-UI to operate
working Lincoln R-57 vacuum idlers. Note:
These parts come with the Weldtron-UI-57UG kit. |
|
Remote Amperage Controls |
|
Stock # WT-70516 |
Model Pipeliner Weldtron Pipeliner Remote Amp Control. |
The remote amperage controller everyone
wants. A complete kit consisting of the hand control, machine board,
magnetic base, electrical outlet for tools and miscellaneous hardware.
Fits
over 59 different welding machines. This controller uses a standard
extension cord for control and auxiliary power. |
Stock # WT-70508 |
Model Pipeliner-I Weldtron Pipeliner-I Remote Amp Control with
mini thumb control accessory. |
A modified Pipeliner Remote Amp Control that
adapts a tiny thumb control for TIG for specialized welding where the
control needs to be attached to the welding electrode holder or TIG torch. |
Stock # WT-70498 |
Model PL-HC
Weldtron PL-HC Hand Control |
A Pipeliner hand control unit. Used
for a spare or for use with any other machine that has a Pipeliner
machine board installed. |
Stock # WT-70466 |
Model 02-0616 Weldtron machine circuit board for Pipeliner
remote controls. |
Machine Circuit board for all Pipeliner
Remote Amp Controls. |
| |
Pipeliner Accessories |
|
|
Stock # WT-70473 |
Model Knob Knob for Pipeliner hand
controls
|
|
|
Stock # WT-70472 |
Model Dial Dial for Pipeliner hand
controls
|
|
|
Stock # WT-70510 |
Model PL-MAG Magnet for Pipeliner
hand controls
|
|
|
Specialty Products
Special order items...manufactured on order |
|
Stock # WT-70486 |
Model SE-101 Static Exciter (Miller
Roughneck series) |
Replaces the Miller
038-432 static exicter found on the
Roughneck series of welding machines. |
Stock # WT-70524 |
Model FS-1 Weldtron Fuel Saver |
Easily attaches to Lincoln and Miller
machine idle systems and turns the engine off after a preset (1 of 2 timing
cycles) time if the machine is not used for either welding or power. |
